The truck is a 2020 GMC AT4 1500
- Lift: BDS 4" Coilover lift kit (makes it a 6" on the AT4/ Trail Boss trucks)
- Wheels/ Tires: 20x9 Black Rhino Warlords -12 offset; Toyo RT 35x11.50x20
- Trimming: Minor trimming on the fender liners
- Install Time: 12 Hours
- Lift Kit Link: https://www.injectedmotorsports.com/product/bds-4-coilover-system-19-21-...
Notes:
On the cut/weld it will be done on the driver-side rear cross member pocket. You're creating space for the new cross member. The weld-in plate is just to make the bracket more sturdy (extra support), it does not hold any weight. (used a simple MIG welder for this):
On the passenger side rear pocket you'll only cut the front side, do not cut the back side of the pocket:
The reservoir shock mounts will go on the back side of the control arm, be sure not to route them between the brake lines:
Before and after the lift on the rack: