Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
Descriptor: Excludes vehicles equipped with Quadrasteer; Front Lifted Height: 4-6"Quantity Needed Per Vehicle: 2*Collapsed Length (IN): 13.52*Extended Length (IN): 21.46*Collapsed Length (MM): 343.3*Extended Length (MM): 545Finish: Zinc platedReservoir: NoBody Design: 46mm ID smooth body (Non-coilover)*Lift Height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet.Shock Absorbers sold individually.