Put your welcome message here. You can edit this in the admin site.
Forum | Topics | Posts | Latest Post | |
---|---|---|---|---|
0 | 0 | No Posts | ||
2007.5 Chevrolet Silverado 2500HD
6.6L LMM Duramax
Callie’s Compstar Crankshaft (Keyed)
Wagler As-Forged Rods
Wagler Race Cast Delipped Pistons (.020)
Mahle Piston Rings
Mahle Grade C Head Gaskets
Mahle Upper and Lower Gasket Kit
ProMaxx Performance Race Heads
ARP 2000 Head Studs
ARP Main Studs
ARP Rod Studs
SDP Compound Turbo (S480 Billet/ Stock)
PPE Race plug
PPE Ported Fuel Rail Fitting
FASS 165gph Lift Pump
12mm Exergy CP3
DieselRX Glow Plugs
Murray Water pump
Melling M316 High Volume Oil Pump
AC Delco Thermostats
Duralast Radiator
AC Delco MAF
(2) New Intake Air Temp Sensors
100% Over Industrial Injection Injectors
Factory Fuel Filter Deleted
SDP PCV reroute
PPE Up Pipes
SDP 4” Downpipe
Flo-Pro 4” Full Exhaust
MBRP 6” Exhaust Tip
Stage 1 Built Transmission (07/24/2017)
EFI Live
DSP5 switch
StarLite DSP5 Tunes
StarLite TCM Tunes
Red Dirt Road Wheels 20x12 -44mm
Nitto 420s - 305/50R20
Edge CTS3 Insight
New Gates Idler Pulleys
Rotella T6 Full Synthetic oil
Wix Oil Filter
Baldwin Fuel Filter | 0 | 0 | No Posts | |
6.6l Duramax. 3" MBRP downpipe, 5" MBRP straight pipe exhaust, 7" tip, Pusher Supermax Y-Bridge kit with hot side intercooler pipe, Pusher intake horn, ProFab exhaust manifolds and up pipes, EFI Live with 5DSP switch, Air Dog 4G 165 lift pump, and OPT-7 HIDs (lows, highs, and fogs). The truck is featured on YouTube at XtrodinaryDuramax!! | 0 | 0 | No Posts | |
All Kryptonite front end! | 0 | 0 | No Posts | |
<>
2" leveling kit
37 12.50 20 toyo rt tires
1.5" wheel spacers
2" blocks
1" front diff drop | 0 | 0 | No Posts | |
2.5" PMF suspension
S&B air intake, icon trac bar, OUO traction bars | 0 | 0 | No Posts | |
7" BDS Lift, 24x12
37" tires | 0 | 0 | No Posts | |
LMM duramax, 6" Zone lift with 4" rear blocks
35x12.50x20 RBP Wheels
Nitto Ridge Grappler tires | 0 | 0 | No Posts | |
What's up guys! This is my 2017 Ram 2500. Ive come along way with this build and still not done yet.
I did full egr and dpf delete. 5" turbo back exhaust from FloPro. Ez Lynk with PPEI tuning. S&B cold air intake. Banks 4" Monster Ram intake elbow
All parts were purchased off Injectedmotorsports.com. You can't beat their customer service.
follow me on Instagram for more pics and progress on my build! @Silvered_6.7 | 0 | 0 | No Posts | |
A daily driver build not sure on the course power but has some serious get up and go.
Most of the mods I added and bought from hunter at injected and some where on the truck when I bought it. | 0 | 0 | No Posts | |
Arp 625 head studs
flux apex 200 hp injectors
ppe dual fueler kit with Exergy sportsman's Cp3 over stock Cp3 (injected motor sports)
S&B cold air intake dry filter ( injected motor sports)
Ppe fuel rail plug
Airdog ll 4g 165cc lift pump
Industrial injection silver series 69/74/14 turbo
Built billet transmission, Goerend triple disk torque converter, lower than stock stall, billet flex plate, billet input,output, and intermediate shafts, billet valve body
17" fuels wrapped in 35x17x12.5 BF Goodrich All Terrians
Fox shocks with remote reservoirs
4" Diamond eye turbo back exhaust
4" inch inlet, 8" outlet Custom built juggernaut exhaust tip | 0 | 0 | No Posts | |
Our Previous Show Truck
EFI by Ridgerunner diesel
64/72mm Drop in Turbo (injected motorsports)
Mike L Built Transmission Goerend X Converter
PPE race plug PPE ported fuel rail fittings S
SDP 4” intake and intake horn with crankcase fittings
Magnaflow DP Diamond Eye 5 in Exhaust w/muffler, 6" mbrp tip
LML Hydroboost PSC Steering Gear PSC steering pump PSC hydro lines Kryptonite Upper Control Arms Kryptonite Centerlink Kryptonite Tie rods Kryptonite idler arm and support brace package with frame gusset Kryptonite lower ball joints Kryptonite Sway Bar Links
Hawk pro ceramic pads Hawk drilled/slotted rotors
Bilstein 5100s shocks Deviant 1/2" trans cooler lines, PPe trans cooler Airdog II 4G 165gph lift pump with g&r sump Factory filter deleted
Boost auto console charger Boost auto tow mirrors with led backups AMP Powersteps
Bushwacker Fender flares
18x9 XD Grenades -12 offset with brand new nitto 33" ridge grapplers | 0 | 0 | No Posts | |
2015.5 LML High Country Duramax, 4x4
Leveled
- Hico 18x9 wheels
- 285/70/18 Nitto ridge grapplers
- Ranch Hand bumper
- Airdog II 4g 100gph lift pump
- Ez Lynk
- S&B intake
- Flo Pro exhaust
- Mbrp downpipe
- Bushwacker Fender Flares
- Fox 2.0 shocks | 0 | 0 | No Posts | |
0 | 0 | No Posts | ||
Current Build:
- Banks Derringer w/ idash and Pedal Monster
- Banks Air intake w/ dry filter
- RBP 20x10 -25 offset Wheels
- 4" Cognito Lift Kit
- Toyo 275/65/20
- Amp Research Power Steps
- GoRhino Front and Rear Bumpers (coming)
- Rigid Industries Fog lights (F&R)
- S&B Map Spacer Kit
- Debaged and paint matched
- Much more to come with this build! | 0 | 0 | No Posts |