Jeep JK/JKU Rzeppa High-Angle Factory Replacement CV Joint Kit 07-18 Wrangler JK/JKU TeraFlex

The TeraFlex JK/JKU Rzeppa High-Angle Factory Replacement CV Joint Kit replaces worn or damaged factory Rzeppa CV joint and driveshaft without resorting to an expensive aftermarket U-joint upgrade. The high-angle CV housing reduces boot failure common with 3 inch or more lift heights.

The included low-friction grease is engineered specifically for the high RPM needs of the JK/JKU Rzeppa CV joint and features high-viscosity surface bonding characteristics necessary to properly adhere the grease to all moving surfaces.
Fits:

• JK Wrangler (2-door)
• JKU Wrangler Unlimited (4-door)

Includes:

• CV joint assembly
• High-angle CV housing cap and boot
• Bolt flanges
• Socket head bolts
• 6mm Allen wrench
• Low-friction CV grease
• Sold As A Kit

Note:

• Proper grease packing of the joint is essential for joint longevity.
• Grease must be packed thoroughly and liberally to the entire CV assembly.
• Be generous and use all grease provided. Improperly packing the bearings w/out sufficient grease will result in bearing failure.
• Install Time: 1 Hour
• SKU: 1744014