Turbocharger Intercooler Pipe

If you have an LML truck and are looking for a single charger that spools decent with more upper RPM HP, this is a great choice. We've tested the durability of these SX-E S300's to make sure that they are up to our standards and they have passed the test! With a 360 thrust bearing, billet compressor wheel and Borg Warner racer cover, they perform and last. With the S369SX-E, we see ~200rpm slower spoolup but much lower EGT's once you are on top of the turbo. We also have options for smaller sizes that will outperform the stock turbo on the top end, and spool nearly the same.

This is an upgrade to the factory upper coolant hose going to the radiator. We make ours out of 304 Stainless Steel so you can be worry free of rust and deforming as you would get from either steel or aluminum. We can add 1/8"NPT bungs as necessary so that you can monitor temp or pressure with an auxiliary gauge.